Operating the device
This section explains how to operate the device safely.
Do not place the device inside magnetic fields or within interference from nearby electric machines. Doing so can inhibit wireless connectivity or damage the device.
Do not place the device in metal-containing enclosures. Doing so may inhibit or completely suppress wireless connectivity.
Follow the recommendations of the IEC 60215:2016 standard, “Safety requirements for radio-transmitting equipment”.
Register the device with the Moeco online platform. You can also do this in advance.
Switch the device to the active mode. To do this, press and hold a small button in the upper left area of the device for at least 3 seconds (Fig. 3). Release the button when the indicator starts to blink green. If the indication is different, e.g., red, see Troubleshooting for possible reasons.
Once in the active mode, the device will connect to the Moeco platform.
Attach the device to the cargo by removing the protective film at the back and sticking the device to the surface (Fig. 4).
When the cargo arrives to destination, detach the device from the cargo or cargo package and dismantle as follows:
Pry up the corner of the device and peel the device off the cargo surface (Fig. 5). It should be removed from the cargo entirely.
Divide the device casing into halves and separate the electronic module from plastic and cardboard parts (Fig. 6).
To dispose of the device, follow the recommendations from section Disposal and recycling of this manual.