Operating the device

This section explains how to operate the device safely.

At departure

  1. Register the device with the Moeco online platform. You can also do this in advance.

    Note

    You can find the guide to registering the device at https://docs.moeco.io/platform/howtos/shipment-creation-app.html.

  2. Switch the device to the active mode. To do this, press and hold the button in the center of the device for at least 3 seconds (Fig. 3). Release the button when the indicator starts to blink green.

    Once in the active mode, the device will connect to the Moeco platform.

  3. Attach the device to the cargo by removing the protective film at the back and sticking the device to the surface (Fig. 4).

    Note

    Do not attach the device to the top or the bottom of the cargo where it can be crushed under the cumulative weight of multiple cargo items stacked on each other. This can negatively affect the device.

Image of the device being attached to the box with indication of the protective film to be removed beforehand.

Fig. 4 Attaching the device to cargo

On arrival

When the cargo arrives to destination, detach the device from the cargo or cargo package and dismantle as follows:

  1. Pry up the corner of the device and peel the device off the cargo surface (Fig. 5). It should be removed from the cargo entirely.

    The image of a box with a sticker on it. The sticker's upper corner is pried off.

    Fig. 5 Removing the device from the cargo

  2. Divide the device casing into halves and separate the electronic module from plastic and cardboard parts (Fig. 6).

    The image of the device separated into three segments: top cover, electronic module, and bottom with an adhesive side.

    Fig. 6 Disassembling the device

To dispose of the device, follow the recommendations from section Disposal and recycling of this manual.